Beamz DMX-024PRO Manual De Instrucciones página 9

8. MASTER A SLIDER: slider will adjust the output of preset A.
9. BLIND KEY: This function takes the channel out of the chase of a program in CHNS /SCENE mode.
10. MASTER B: slider control setting the light intensity of channels 13 to 24.
11. HOME KEY: This button is used to deactivate the "Blind" function.
12. FADE TIME SLIDER: Used to adjust the fade-time.
13. TAP SYNC: button to synchronize the STEP rhythm with the music.
14. SPEED SLIDER: Used to adjust the chase speed.
15. FULL-ON: This function bring overall output to full intensity.
This slider controls the sensitivity of the Audio input.
16. AUDIO LEVEL:
17. BLACK OUT: button switches all outputs to zero. The yellow LED is flashing.
This button is used to go to
18. STEP:
Activates audio sync of chase and audio intensity effects.
19. AUDIO:
This button is used to maintain current scene.
20. HOLD:
21. PARK: in mode, press it to select SINGLE CHASE or MIX CHASE. In DOUBLE PRESET ,pressing PARK
B is same as MASTER B at the maximum. In SINGLE PRESET ,pressing PARK A is same as MASTER A at the
maximum.
22. ADD / KILL / RECORD EXIT: exit record key. When LED is lit it is in KILL mode, in this mode press any flash key and
all channels are zero except the channel selected.
23. RECORD / SHIFT: press it to record the step of program.
24. PAGE/REC CLEAR: button to select a memory page from 1 to 4.
25. MODE SELECT / REC SPEED: Each tap will activate the operating mode in the order:
and Single Preset. Rec Speed: Set the speed of any of the programs chasing in Mix mode.
26. DARK: press it to pause whole output, including FULL ON and FLASH.
27. EDIT / ALL REV: Edit is used to activate Edit mode. All Rev is to reverse the chasing direction of all programs.
28. INSERT / % or 0-255: Insert is to add one step or steps into a scene. % or 0-255 is used to change display value cycle
between% and 0-255.
29. DELETE / REV ONE: Delete any step of a scene or reverse the chasing direction of any program.
30. DELETE / REV ONE: button inverts the running direction of a determined scene.
31. DOWN / BEAT REV. : DOWN functions to modify a scene in Edit mode; BEAT REV is used to reverse the chasing
direction of a program with regular beat.
step
or following scene.
next
Shift functions only used with other buttons.
, Double Preset
9