Publicidad
Idiomas disponibles
Idiomas disponibles
– Never attempt to exchange the mains cable of the
appliance as special tools are required for this. To ensure
continued safety of the appliance, if the cable needs to be
repaired or exchanged, have this carried out exclusively by
a customer service workshop authorised by the manufac-
turer.
– Unplug from outlet when not in use and before cleaning.
Never immerse the item in water: remember this is an elec-
trical appliance.
– Only clean the appliance using a brush or damp cloth.
– To protect against fire, electric shock and injury to persons
do not immerse cord, plugs in water or other liquid.
– Avoid contacting moving parts.
INSTALLATION
– Place the appliance on a stable flat surface which is neither
hot nor near a heat source. The surface must be dry. Keep
the appliance and its mains cable out of reach of children.
– Ensure that the voltage indicated on the rating plate
of the appliance agrees with the mains voltage in your
area. Connect the appliance only to a properly earthed
power point with a minimum output of 6A. (Use a residual
current device (RCD) seek the advice of an electrician.)
While the appliance is in use, the mains plug must be
accessible in case of an emergency. The manufacturer
declines any liability for accidents caused by faulty or
non-existing earthing of the appliance.
– If the power point is unsuitable for accommodating the
plug of your appliance, have the power point changed by
a licensed electrician.
SAVE THESE INSTRUCTIONS
3
Publicidad
