Hilti SF 2-A Manual De Instrucciones página 32

Noise information
Typical A-weighted sound power level
Typical A-weighted emission sound
pressure level
Uncertainty for the given sound levels
Vibration values
Drilling in metal (a
Uncertainty (K)
5 Operation
5.1 Inserting/removing the battery
CAUTION
Risk of injury. The drill/driver may start inadvertently.
▶ Before fitting the battery, check that the drill/driver is switched off and
that the switch safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts in the drill/driver are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop
out and fall, thereby presenting a hazard to other persons.
1. To insert, push the battery into the tool from the front until it engages with
an audible click.
2. To remove, press and hold down the release button and pull the battery
forward and out of the tool.
5.2 Fitting the belt hook (optional)
WARNING
Risk of injury. A falling power tool may present a risk of injury to yourself
and others.
▶ Check that the belt hook is fitted securely before beginning work.
26 English
Printed: 15.03.2019 | Doc-Nr: PUB / 5174884 / 000 / 02
)
h,D
SF 2­A
75 dB
64 dB
3 dB
SF 2­A
1.9 m/s²
1.5 m/s²
2
3
2081398
*2081398*
SFD 2-A
75 dB
64 dB
3 dB
SFD 2-A
1.9 m/s²
1.5 m/s²