Step 3 - Load The Washer; Step 4 - Start The Washer - Haier HLPW028AXW Manual Del Usuario

Lavadora de ropa con carga superior
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Liquid Detergent
1. Fill washer with a small amount of water and add liquid detergent.
NOTE: For best results, add the detergent to the wash basket before loading
with laundry.
2. Run washer for 30 seconds to dissolve detergent completely.
Powdered Detergent
1. Pour measured powdered detergent
directly into the detergent dispenser.
ADD BLEACH (IF DESIRED)
Pour measured liquid chlorine bleach into the
liquid chlorine bleach dispenser.
NOTE: Use only liquid bleach in this dispenser.
IMPORTANT: Be careful not to spill undiluted
bleach onto the washer cabinet or your
clothes. Since it is a strong chemical, it may
damage clothes or the finish of the washer.
Follow manufacturer's directions on garment
label for recommended use of liquid or
powder bleach.

STEP 3 - LOAD THE WASHER

1. Load garments loosely and evenly around the wash basket.
2. Do not place clothes directly over the center of the pulsator.
3. Close the washer lid.
NOTES:
Do not overload or stuff items into the wash basket. Overloading may reduce
wash efficiency, cause excess wear and possibly cause creasing or wrinkling of
the load.
The washer will not pulsate or spin with the lid open.

STEP 4 - START THE WASHER

1. Press the POWER button to turn the washer on.
2. Select a wash cycle.
3. Modify the default settings and options if desired.
4. Press the START/PAUSE button to start the wash cycle.
21

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido