Reassembly, Repair And Rebuilding Of The Heater; Service Instruction; Handover; Technical Data - Stiebel Eltron ETC 170 A Instrucciones De Uso Y Montaje

Acumuladores de calor estáticos para tarifa nocturna
Ocultar thumbs Ver también para ETC 170 A:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

During the first days of charging, a mild smell
may be emitted from the heater. Consequent-
ly, the room in which the heater is installed
should be thoroughly ventilated throughout
this period. Rooms in which the first charge
takes place no one should be asleep.
2.7 Reassembly, repair and
rebuilding of the heater
If the unit is reassembled following a repair or
following relocation of the unit, the procedure
set out in these operating instructions should
be followed, in the same way as for an initial
installation.
In these cases, particular care should be taken
that:
– damaged parts are replaced by original
STIEBEL ELTRON spare parts;
– the testing required in section 2.6.1 of these
instructions are repeated.

2.8 Service instruction

If the unit fails to charge, the non-self-resetting
thermal cut-out (F3) may have tripped.
In this event the unit must be electrically dis-
connected by a competent person and the
cause of the fault identified and rectified. The
reset pin on the non-self-resetting thermal
cut-out should then be pushed back in. (see
following illustration).

2.9 Handover

The operation of the heater should be exp-
lained to the user. Particular emphasis should
be made to the safety instructions. These ope-
rating and installation instructions should be
handed over to the user.

Technical data

B
Weight (with heat storage bricks)
Length „L"
Distance „A"
Distance „B"
F3
Connection
Output by
Rated charging (7 h) by 230 V
Heating element
Quantity
Core bricks
Quantity of packs
Weight
3. Environment and re-
cycling
Dispose of packing material and appliances
The dispose of the packing material and the
appliances must be done according to the lo-
cal recycling laws and regulations.
L
A
ETC 170 A
ETC 85 M
ETC 170 M
kg
45
mm
355
mm
185
mm
85
1/N/PE ~ AC 220-240 V 50/60 Hz
220 V
0,78 kW
1,56 kW
230 V
0,85 kW
1,7 kW
240 V
0,93 kW
1,85 kW
kW/h
6
pcs.
1
pcs.
2
kg
31

4. Guarantee

For guarantee please refer to the respecti-
ve terms and conditions of supply for your
country.
The installation, electrical connection
and first operation of this appliance
should be carried out by a competent
person.
The company does not accept liability
for failure of any goods supplied which
are not installed in accordance with the
manufacturer's instructions.
170 mm
31 mm
133 mm
ETC 250 A
ETC 340 A
ETC 250 M
ETC 340 M
82
121
165
585
815
1045
415
555
785
85
130
130
2,33 kW
3,11 kW
2,55 kW
3,4 kW
2,78 kW
3,7 kW
11,9
17,9
23,8
2
3
4
4
6
8
62
93
124
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Etc 250 aEtc 340 aEtc 85 mEtc 170 mEtc 250 mEtc 340 m

Tabla de contenido