Quick Charge - Philips RQ1200 Serie Manual De Instrucciones

ENGLISH
10
10

Quick charge

After the shaver has charged for 3 minutes, it contains enough energy for
one shave.
Charging in the charger
1 Insert the small plug into the charger.
2 Unfold the charger ('click').
3 Put the adapter in the wall socket.
4 Put the shaver in the charger.
The display shows that the shaver is charging (see chapter 'The
,
display').
Charging in the Jet Clean System (RQ1296CC, RQ1295CC,
RQ1290CC, RQ1286CC, RQ1285CC, RQ1284CC, RQ1280CC,
RQ1275CC, RQ1265CC, RQ1260CC, RQ1252CC, RQ1251CC,
RQ1250CC only)
1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
Note: The shaver cannot be placed in the Jet Clean System when the protection
cap is on the shaving unit.
Note: RQ129x only: when you turn the shaver upside down, the minutes
indication on the display is also turned upside down so you can still see to what
level the battery is charged.