Features - Ryobi RY44140 Manual Del Operador

PRODUCT SPECIFICATIONS
Cutting Capacity.............................................................................................................................................................2/3 in.
Total Blade Length...........................................................................................................................................................24 in.
Cutting Strokes Per Minute .............................................................................................................................................1,500
Input ........................................................................................................................................120 V, AC only, 60 Hz, 4 Amps
Weight ..........................................................................................................................................................................8.4 lbs.
KNOW YOUR HEDGE TRIMMER
See Figure 2.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE COVER
The blade cover keeps the operator from coming in contact
with the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage.
CORD RETAINER
A convenient cord retainer helps keep the extension cord
connection secure during trimmer operation.

FEATURES

DEBRIS DEFLECTOR
When installed, the debris deflector makes removal of cut
debris easier.
GUARD
The guard helps to deflect chips or other debris away from
the operator's hands.
ROTATING REAR HANDLE
The rear handle can be rotated to lock at either side in 45°
or 90° angles for ease of use when trimming. This is useful
when trimming vertically or along the sides of shrubbery.
SWITCH TRIGGER
The switch trigger, located beneath the rear handle, must
be depressed while simultaneously grasping the switch in
the front handle to allow blade rotation.
Page 7 – English