Intended Use; Description Of The Parts / Supplied Parts; Unpacking The Appliance; General Use Instructions - Profi Cook PC-KM 1025 Instrucciones De Servicio

• Do not move the appliance during operation; always turn it off first and
disconnect from mains power supply. Always carry the appliance with
both hands!

Intended Use

This appliance is designed as a
• kneading / mixing machine for preparing dough, crèmes, cream, whipped
egg white;
• multi-chopper for the chopping of easy to cut food;
• citrus press for extracting the juice from citrus fruit;
• blender to puree, whip or mix
It is designed solely for these purposes and may only be used for them.
It may only be used in the manner described in this instruction manual.
The appliance may not be used for commercial purposes.
Any other use is considered not as intended and may lead to damage to
property or even personal injury.
The manufacturer assumes no liability for damage resulting from use other
than the intended purpose.

Description of the Parts / Supplied parts

Overview controls on page 3:
1 Two-part pusher
2 Lid of the working bowl with feed shaft
3 Kneading / Stirring tool
4 Working bowl
5 Guide pin
6 Drive shaft
7 Control panel
8 Motor housing
9 Whisk attachment
10 Dicing blade
11 French fry /Julienne blade
12 Potato grating blade
13 Fine grating / cutting blade
14 Coarse grating / cutting blade
15 Citrus press cone
16 Filter sieve
17 Blender jug cap
18 Blender jug lid with filler hole
19 Blender jug
20 Knife block
Not shown: Dough scraper

Unpacking the appliance

WARNING: Risk of injury!
Some parts of the accessory are very sharp!
1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic film, filler material, cable
ties and box packaging.
3. Check that all parts are in the box.
NOTE:
Dust or production residues may still be found on the appliance. We rec-
ommend that you clean the appliance as described under "Cleaning".

General Use Instructions

Functionality of the device

• The appliance is equipped with safety switches. The appliance can only
be operated if you observe the following:
- When fitting onto the motor housing, the working bowl or the blender
38
jug with the knife block must audibly click into place.
- When using the working bowl, either the lid or the filter sieve must
audibly click into place onto the bowl.
• The appliance is operated with either the function keys (SMOOTHIE,
ICE, TURBO) or / and with the variably adjustable control knob.
• You can variably adjust the speed with the control knob. Always start
slowly with a low speed. Slowly increase the speed.
• The function keys are disabled when you have turned on the appliance
with the control knob.
• You turn on the standard programs with the function keys. The pro-
grams do not turn off automatically
• While one standard program is active, you can switch to a different pro-
gram or can change the speed with the control knob.
Meanings of the keys
Keys Functions
POWER
Ready to use
SMOOTHIE Maximum speed, no automatic shutoff
ICE Automatic pulse operation, no automatic shutoff
Manual pulse operation. As long as you keep this key
TURBO
pressed down, the appliance will run at maximum speed.
CAUTION:
Do not use the appliance longer than 5 minutes continuously. Let it first
cool down for 10 minutes.

Electrical Connection

Ensure that your mains power corresponds with the specifications on the
type label.

On / Off

Connect the appliance to a properly installed earthed socket. The LED of the
POWER button will flash blue.
1. Ensure that the control knob is set to the OFF position.
2. Press the POWER button. The appliance is operational. The LED of the
button will be lit up permanently blue. The LED's of the function keys will
flash red.
Turning on and off with the control knob
- Turning on: Turn the knob clockwise in the MAX direction to the
desired speed. The blue LED's between MIN and MAX display the
speed setting (1 – 5).
- Turning off: Turn the knob anticlockwise to the OFF position. The
blue LED's will go out.
Turning on / off with the function keys
- Turning on: Press the desired key once. The LED of the key will be lit
up permanently red.
- Turning off: Press the respective button one more time. The LED of
the button will flash again.
3. If you want to cancel the operation, press the POWER button. The LED's
of the function keys will go out. The LED in the POWER button will flash.
4. Disconnect the mains plug.

Using the working bowl

Assembly of the working bowl and the accessories

Please refer to the figures 1 to 5 on pages 4 and 5 for this purpose.
WARNING:
The grating and cutting blades, the potato grating blade, the French fry /
Julienne-blade and the dicing blade are very sharp on the cutting and grat-
ing surfaces! Therefore use these accessories with the necessary care to
prevent injuries.