Temp Mid; Temp High; Cool Factor - Domus DTP2-11 Manual De Usuario

4.2.9 TEMP MID

This parameter defines the value in ºC which will be effective when the user selects
Mid temperature. The factory value is 60 ºC, although this can be edited. Use the INC ()
and DEC () keys to modify the temperature, and the SELECT key to confirm the
modification
.
4.2.10

TEMP HIGH

This parameter defines the value in ºC which will be effective when the user selects
high temperature. The factory value is 80 ºC, although this can be edited. Use the INC ()
and DEC () keys to modify the temperature, and the SELECT key to confirm the
modification
.
Note: This value should not be increased.
4.2.11

COOL FACTOR

After all the temperature settings have been defined, the cooling time to the end of the
cycle should be configured. The Cool Factor parameter defines the length of this cooling.
The factory setting is 0 but this can be modified. Use the INC () and DEC () keys to
modify the value, and the SELECT key to confirm the modification
IMPORTANT! THE COOL DOWN MINUTES ARE INCLUDED IN THE SELF-
TEMP MID-
060 ºC
TEMP HIGH-
080 ºC
COOL FACTOR
001
SERVICE PROGRAMME TIME
.
63