Paper Saver; Sizing; Real Dial Size - Provo Craft Cricut Manual Del Usuario

Last On/Off
Set
Use the load last key instead of the load Paper key when you want the blade to start
Shadow Load Shadow
Paper
Blackout
Last cutting at the point on the paper where the previous cut ended.
Size
The Paper Saver key automatically rearranges your selections to take up the least amount
Load Unload
of space possible on your paper. If you turn the Paper Saver function on, that will become
Paper Paper
Paper Real
your default setting. The next time you turn your Cricut
Saver Dial Size
activated. If you want to deactivate it, you will need to press Paper Saver again.
Shift
Shift
Lock

SIzING

Slotted
Characters are measured from the lowest possible point to the highest possible point.
Silhouette
Shadow
Blackout

real dial Size

Real
If real dial Size is selected, all letters or shapes will be sized according to the selected
Dial Size
dial size, rather than cutting proportionate to the Key Height Character or the base shape.
Shift
Font Set
Lock
real dial Size OFF
TIP: Only one dial size can be selected for each cut, and that dial size will be applied to all characters on
the LCD screen. For example, you cannot select an "A" at 1" (2.5 cm) and then immediately select a "B"
at 2" (5.2 cm) in the same cut. We recommend you check the size appearing in the LCD screen prior to
pressing the cut button.
14
Paper Saver OFF
real dial Size ON
machine on, Paper Saver will still be
®
Paper Saver ON
In font sets, the Key Height Character (shown here
in red) is the tallest character in any one font set.
All other characters will be sized in proportion
to the Key Height Character, unless real dial
Size is selected.
In shape sets, all images are created at the same
height unless an image is cut as a "layer," in which
case it is proportionate to its base shape.
Layer
Base Shape
real dial Size OFF
Shape Set
real dial Size ON