Positioning Your Cricut ® Personal Electronic Cutter; What Your Cricut ® Machine Can Cut; Basic Operations; Set-Up - Provo Craft Cricut Manual Del Usuario

PoSitioning Your cricut
6"
When positioning your Cricut
• inaccessible to children. The Cricut
blade, that could be hazardous to children.
• stable, flat, and hard-surfaced, within 6 feet (1.8 meters) of a grounded electrical outlet, and that has a
minimum clearance of 1 foot (30.5 cm) around the Cricut
• indoors or in a dry location where the Cricut
the weather.
• away from direct exposure to sunlight or extreme temperatures such as in parked cars, storage sheds,
sunrooms, etc.
WARNING! Your Cricut
®
locations, or in environments where the machine or cartridges can come in contact with water.
WhAt Your cricut
The Cricut ® Personal Electronic Cutter can cut a wide range of paper from vellum to cards tock up to 0.5 mm thick. Provo
Craft has created cardstock pads and designer paper pads that coordinate with the Cricut
12" papers fit perfectly in the Cricut
TIP: The repeated cutting of heavy cardstock and similar weights of paper may reduce the life of your
®
Cricut machine's cutting blade and mat.

BASic oPerAtionS

®
PerSonAl electronic cutter
Place your cricut
®
of your table to prevent it from tipping and causing
possible injury.
machine, choose a location that is:
®
machine is not a toy and contains components, including a sharp
®
cartridges are not directly exposed to the effects of
®
machine should never be left or stored outside, in un-heated or un-air conditioned
® mAchine cAn cut
® machine.

SET-UP

Plug your Cricut
and turn it on by pressing the On button to the right of the
machine door.
The doors of the machine will open when the On button is
pressed. If the doors do not open, use gentle pressure to
open the Cricut
Place the keypad overlay on top of the machine's keypad.
machine at least 6" from the edge
machine for paper movement.
®
machine into a grounded electrical outlet,
®
machine's door completely.
®
® shape cartridges. These 6" x
7