Fitting, Removing Highpressure Hose; Fitting, Removing Spray Lance - Stihl RE 661 Manual De Instrucciones

English
°e < = 15
> 15
°f < = 21.4
> 21.4
ppm CaCO < = 214
3
> 214
mval/l < = 4.28
> 4.28
mmol/l < = 2.14
> 2.14
Fill with STIHL scale inhibitor
Open storage tank cap (1)
N
Fill with STIHL scale inhibitor
N
Replace cap on storage tank
N
44
Fitting, removing spray
1 : 1
lance
undiluted
1 : 1
undiluted
1 : 1
undiluted
1 : 1
undiluted
1 : 1
undiluted
Pull back and hold the coupling (1)
N
Push the spray lance (2) into the
N
mount on the spray gun, or pull it out
to remove the spray gun,
respectively
Release the coupling (1)
N
1
2
Fitting, removing high-
pressure hose
Machines without hose reel
Connecting the high-pressure hose
Push high-pressure hose (1) onto
N
the connector
Attach union nut (2) and screw it on
N
and tighten by hand
Disconnect the high-pressure hose
Unscrew the union nut (2)
N
Pull high-pressure hose (1) off of
N
connector
Machines with hose reel
The high-pressure hose is already
connected.
RE 661, RE 661 PLUS, RE 961 PLUS