General Information; Technical Data; Intended Use; Safety Information - Soehnle Professional 3710 STANDARD Instrucciones De Uso

4. GENERAL INFORMATION

4.1 Technical data

The weighing range and scale interval are indicated on the data plate on the scales.
Operating temperature:
Storage temperature:
Humidity:
Air pressure:
Battery operation:
Mains supply:
Power adapter to be used: Plug-in power adapter 618.020.070
The technical specifications of the power supply are printed on the power adapter.

4.2 Intended use

These scales are intended for fiscal metering applications. They meet the relevant
requirements of EC Directives 2014/30/EU, 2014/35/EU, 2014/31/EU.
This user manual is considered an integral part of the equipment. The instructions in the
manual must be followed exactly in order to ensure that the equipment is used properly and
operated correctly.
Soehnle Professional will accept liability for the safety of the equipment only if the user has
paid attention to the information in the user manual and operated the equipment according
to the instructions. Before using this device, the user should check that it is in an acceptable
condition and functionally safe. Users and operators must familiarise themselves with the
controls. This device is not intended for use in potentially explosive atmospheres.

4.4 Safety information

This device is intended for professional use only. Please read carefully through the user
manual before starting up the equipment. It contains important information concerning the
installation, correct use and maintenance of the equipment. The manufacturer will not be
liable if the user does not observe the following instructions: When using electrical
components with higher safety requirements, you must follow the corresponding
regulations. Never carry out work on the device while it is carrying live voltage.
There are no special personnel requirements - the display unit can be used anywhere. This
product is not designed for use in critical environments (CT, defibrillators). It is not for use in
environments where there is a risk of explosion. The mains-operated display unit must be set
up so that it can be easily disconnected from the mains power (ensure that the socket is
accessible). The display unit should be protected from moisture.
www.soehnle-professional.com
- 10 °C to + 40 °C
- 20 °C to + 65 °C
20% to 85% relative humidity without condensation
950 ... 1050 hPa
7.2 Volt
100...240 V / 50...60 Hz, 250 mA
23