Stop Charging; Charging Mode (Rfid Mode); Setting Up Rfid Card - VESTEL EVC04-AC22 Serie Manual De Usuario

1.2 - STOP CHARGING

1- Unplug the charging cable from the vehicle first
to stop charging. Do not attempt to remove the
plug from the station before unplugging it from
the vehicle. Otherwise locking mechanism may
get damaged.
2 - AUTHORISED CHARGING MODE (RFID MODE)

2.1 SETTING UP RFID CARD

If you want to use your station with card authorization, you must following the steps specified as below.
Warning : Ensure that the plug of the charging station is not connected during RFID card registeration
and removing steps.
Registering User RFID card;
Tap the master RFID card to the RFID reader. After "BEEP" sound, tap User RFID card to the RFID reader in
10 seconds. Only one User RFID card can be registered after tapping Master RFID card. In this way, you
may register User RFID card to the charging station one by one and hear "BEEP" sound confirming the
registration. Maximum 20 user cards can be registered to a charging station.
Removing User RFID card;
Removing a user card is similar to registering a user RFID card. If you want to remove an authorized user
RFID card from the station, you must tap the User RFID card to the RFID reader in 10 seconds, after tapping
a Master RFID card.
IB v1.0 2019
2 - Unplug the charging cable from the station.
"BEEP"
© 2019 Vestel - All rights reserved
"BEEP"
English - 10