Sony DRC-BT15 Manual De Instrucciones página 11

3
Perform pairing
procedure on the
Bluetooth device to
detect this unit.
The list of detected devices
appears on the display of the
Bluetooth device. This unit is
displayed as "DRC-BT15."
If "DRC-BT15" is not
displayed, repeat from step 1.
Notes
• For details, refer to the operating
instructions supplied with the
Bluetooth device.
• When pairing with a Bluetooth
device that cannot display a list of
detected devices or that has no
display, you may pair the device by
setting both this unit and the
Bluetooth device to pairing mode.
At this time, if passcode is set
besides "0000" on the Bluetooth
device, pairing cannot be done with
this unit.
4
Select "DRC-BT15" on
the display of the
Bluetooth device.
5
If Passcode
required on the display
of a Bluetooth device,
input "0000."
Pairing is complete when the
indicator (blue) flashes slowly.
The message standing for
"Pairing complete" appears on
the display of some Bluetooth
devices.
* Passcode may be called "Passkey,"
"PIN code," "PIN number," or
"Password."
01US03GET-BT15_U2.p65
input is
*
11
Black
6
Start the Bluetooth
connection from the
Bluetooth device.
This unit memorizes the device
as the last connected device.
Some Bluetooth devices may
connect with the unit
automatically when pairing is
complete.
Tips
• To pair with other Bluetooth devices,
repeat steps 1 to 5 for each device.
• To delete all pairing information, see
"Initializing the unit" (page 26).
DRC-BT15_U2 [US] 3-280-224-11(1)
11
US
23/10/07, 2:19 pm