Operations
03 Dry Level
04 Time
05 Damp Alert
06 Wrinkle Prevent
07 My Cycle
08 Drum Light
30
English
DV6850N_DC68-03650E-00_EN.indd 30
Press to adjust the dryness in the Sensor Dry cycles. The
corresponding indicator turns on.
• Larger or bulkier loads may require More for complete
dryness.
• Less is best suited for lightweight fabrics or for leaving some
moisture in the clothing at the end of the cycle.
NOTE
This option is not available with WOOL and ACTIVE WEAR.
Press to adjust the cycle time for 40' EXPRESS, TIME DRY, AIR
FLUFF, and REFRESH cycles.
• The following time options (unit: minute) are available: 30, 60,
90, 120, and 150.
• The exact drying time differs depending on the humidity of
the load.
This alert is available all Sensor Dry cycles except for ACTIVE
WEAR and WOOL. Available dry levels are Normal, More, and
Less.
If a load contains mixed fabrics, the Damp Alert indicator blinks
when average dryness of the item is 80 % dry. This lets you take
items that you don't want fully dried or that dry quickly out of
the dryer early while letting others continue to dry.
Wrinkle Prevent provides approximately 180 minutes of
intermittent tumbling in unheated air at the end of the cycle to
reduce wrinkling. Press Wrinkle Prevent to activate this feature.
The load is dry and can be removed at any time during the
Wrinkle Prevent process.
• Press and hold Wrinkle Prevent for 3 seconds to turn off the
alarm. When the alarm is off, the Alarm Off indicator (
on.
Choose your favorite cycle including the cycle time, temperature,
and dry level. See "My Cycle" for details.
Press to turn on or off the interior lamp. The lamp stays lit for
2 minutes after it has turned on, and then turns off automatically.
) turns
2018/9/17 9:06:46