Safety Regulations; Layout And Items Supplied - EINHELL TC-PT 2500 S Manual De Instrucciones Original

Danger!
When using the equipment, a few safety pre-
cautions must be observed to avoid injuries and
damage. Please read the complete operating
instructions and safety regulations with due care.
Keep this manual in a safe place, so that the in-
formation is available at all times. If you give the
equipment to any other person, hand over these
operating instructions and safety regulations as
well. We cannot accept any liability for damage
or accidents which arise due to a failure to follow
these instructions and the safety instructions.

1. Safety regulations

Danger!
Read all safety regulations and instructions.
Any errors made in following the safety regula-
tions and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
•
Pay attention to the accident prevention re-
gulations.
•
Never exceed the specified payload.
•
Do not use the pallet lifting truck until you
have familiarized yourself with its mode of
operation and been trained and instructed on
how to use it.
•
Check the equipment for damage and make
sure that it is in good working order each time
before you use it.
•
Do not use the pallet lifting truck on uneven
ground or slopes.
•
The pallet lifting truck has no brake. It is not
allowed to be used on upward or downward
inclines.
•
Wear work gloves and safety shoes.
•
It is imperative to stay clear of the area under
lifted loads.
•
The load you want to transport must be distri-
buted evenly over the lifting forks.
•
Never transport loosely piled loads or unsta-
ble loads.
•
The pallet lifting truck is not allowed to be
loaded when the lifting forks are in a raised
position.
•
Loads on raised lifting forks must never be left
unattended.
•
Do not reach into moving parts.
•
Do not transport people.
•
Keep a minimum distance of 60 cm from
Anl_TC_PT_2500_S_SPK7.indb 11 Anl_TC_PT_2500_S_SPK7.indb 11
GB
other persons when transporting loads.
•
The work area must be well illuminated.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1 Handle
2 Control lever
3 Drawbar
4 Hydraulic unit
5 Steering rollers
6 Lifting forks
7 Load-bearing rollers
8 Scale
2.2 Items supplied
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Pallet lifting truck
•
Drawbar
•
Clamp sleeve
•
Bolt
•
Original operating instructions
- 11 -
19.08.15 10:06 19.08.15 10:06