PIXEL UP: 40405 - 40425
1.1
Features
The audio and audio/video module is equipped with:
- interfacing to acoustic devices used by the hard-of-hearing;
- voice synthesis, for signalling the call state;
- Front LEDs, for signalling the call state;
- light sensor function for automatically adjusting the brightness according to the ambient light.
- zoom & scan function, used to zoom in an scan the areas shown by the camera (only 40405);
- electric lock command, connected directly to the terminals S+ and S- or to the contacts supported by the keyboard relays;
- connection for an additional local push button to open the lock or for a "Door open" signalling sensor (refer to the programming
manual);
The display module is equipped with an installation menu with which the basic speech unit configuration parameters can be
managed. With 3.5" LCD display, with the following features: 320 x 480 pixels, 65K colours, 500 lux.
1.2
Teleloop and control speech synthesis function
The device allows persons with disabilities to listen to the call
audio and receive call status signals via an appropriate hearing
aid.
Enable the hearing aid, referring to its instruction manual.
1.3
Zoom & Scan function (only 40405)
This function lets you zoom and scroll through the areas framed
by the camera, as shown in the following figure, with the buttons
of an indoor unit. Use the internal unit OSD or keys F1/F2 to
focus on the 5 fields available.
EN
11