Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10. Wipe the dust bin and the filter housing with the coarse dirt filter off with a
damp cloth.
11. Clean the dust filter. If heavily soiled, wash it with soapy water and rinse it
thoroughly with clean water.
12. Let all parts dry completely.
13. Insert the filter housing with the coarse dirt filter back into the dust bin. At
the same time, make sure that the narrow side is facing up
(see fig. F).
14. Put the dust filter back into the filter housing with the coarse dirt filter. Make
sure that the narrow side is facing up (see fig. F).
15. Mount the dust bin on the motor housing so that it audibly locks into place.
Tip:
The dust filter is designed for continuous use. If, however, it is
damaged and has to be replaced, you can order a new dust
filter via the service address specified on the warranty card.
In order to provide for constant suction power, the dust filter
must be cleaned regularly. Be absolutely sure to clean the dust
filter each time after vacuuming up liquids.
Storage
− Store the vacuum cleaner by fitting it in the corresponding wall bracket or
store it in a dry area.
− Store the vacuum cleaner in a location that is not accessible for children.
Maintenance and troubleshooting
Fault
The vacuum
cleaner is not
working.
The power
indicator light
does not light
up.
AFTER SALES SUPPORT
1-800-886-8506
USA
Cause
The rechargeable battery
of the vacuum cleaner is
low or empty.
The power supply unit or
mains adapter does not
have proper contact.
Solution
Charge the vacuum cleaner
as described in the chapter
"Charging the vacuum cleaner".
Check the connection to the
socket and the vacuum cleaner.
hup-service@h-u-p.com
USA
Storage
19
Publicidad
Capítulos
Tabla de contenido
