Tool Use And Care; Specific Safety Rules For Soldering Stations - Urrea ESOL866 Manual De Usuario

specified voltage may cause a serious injury to
the user as well as damage the tool.
IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.

TOOL USE AND CARE

Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on
or off. Any tool that cannot be controlled with
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken parts,
and any other condition that may affect the
operation of the power tool. If it is damaged,
have it repaired before using. Many accidents
are caused by poorly maintained power tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
E N G L I S H •
Is recommendable to use a safety device suit-
able, such a thermal and differential switch
when you are using an electric equipment.
SERVICE
Tool service must be performed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
SOLDERING STATIONS
WARNING: When the power is on, the tip
temperature is between 100° C and 450° C.
Mishandling may lead to burns or fire, be sure
to comply with the following precautions.
• Do not touch the metallic parts near the Tip.
• Do not use the product near flammable
items.
• Advise other people in the work area that
the unit can reach a very high temperature and
should be considered potentially dangerous.
• Turn the power off while taking breaks and
when finished using the unit.
• Before replacing parts or storing the unit,
turn the power off and allow the unit to cool
to room temperature.
CAUTION: To prevent damage to the unit
and ensure a safe working environment, be
sure to comply with the following precautions.
• Do not use the unit for applications other
than soldering.
• Do not rap the soldering iron against the
work bench to shake off residual solder, or
otherwise subject the iron to severe shocks.
• Do not modify the unit.
• Use only genuine replacement parts.
• Do not wet the unit or use the unit when
your hands are wet.
• The soldering process will produce smoke, so
make sure the area is well ventilated.
• While using the unit, don't do anything which
may cause bodily harm or physical damage
ATTACHING THE NOZZLE
Do not force the Nozzle or pull on the edge of
the Nozzle by pliers. Also, do not retighten the
screw too tightly.
U se r's m a n ua l
11