Brief Description Of The Press Device; Automatic Press Cycle (Fig. 1); Rechargeable Battery - NovoPress AFP101 Instrucciones De Uso

AFP101
EN
Battery charger
For information on the function and operation of the battery charger and the rechargeable
batteries, please consult the battery charger operating instructions.
6

Brief description of the press device

6.1 AFP101 press device (Fig. 1)
1.
2.
3.
4.
6.2

Automatic press cycle (Fig. 1)

The press device features positive control. During pressing, the press device remains in the
position reached, even if button (1) is temporarily released. When the intended switch-off force
is achieved, it is perceptible by means of an increase in the motor speed and a discernible
decrease in pressure. After releasing button (1), the device returns to its initial position. For
safety reasons, the positive control is only activated after a minimum force has been attained.
Until this force is achieved, the pressing process can be interrupted at any time by releasing the
button. The device then automatically returns to its initial position.
6.3

Rechargeable battery

6.3.1 Removing the battery (Fig. 2)
Push in (1) the two release buttons (A) and then remove the battery (2).
6.3.2 Inserting the battery (Fig. 3)
Slide the battery into the device as illustrated until it clicks into place.
Information!
The batteries are not charged at the factory.
Therefore:
– Charge the batteries before using for the first time.
Information!
The rechargeable batteries only achieve full capacity after being
recharged 4-5 times.
Start button
Press jaw
Retaining pin
Rechargeable battery
18