Hazet 6391 Instrucciones De Uso página 9

3. Torque Setting
Torque value
adjustment with
Adjustment
Wrench HAZET
6399:
• Loosen the counter nut screw in the handle
by turning the outer pin wrench of the HAZET
Adjustment Wrench 6399 to the left.
• For torque value adjustment use the inner
6-point wrench and control at the same time
whether the desired torque value is reached.
• To lock the torque value, tighten the counter
nut screw in the handle by turning the outer
pin wrench to the right.
• Only use the original Adjustment Wrench
HAZET 6399 in conjunction with a torque
testing
torque values. Unauthorized readjustment or
tampering of the torque value is impossible.
device for the adjustment of
9