General settings — PSM
Basic procedure
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
SOURCE
2
Select "PSM" menu.
Indications
WallPaper
Clock Hr
Hour adjustment
Clock Min
Minute adjustment
24H/12H
Clock system
CLK Adj
Automatic clock
adjustments
Scroll*
1
*
Some characters or symbols will not be shown (and will be blanked) on the monitor.
1
44
MENU
OK
Selectable settings, [reference page]
You can select the background picture of the monitor from these:
Standard, Red, Amber, Green, SkyBlue, Blue, Purple.
0 – 23 (1 – 12), [11]
[Initial: 0 (0:00)]
00 – 59, [11]
[Initial: 00 (0:00)]
12Hours – 24Hours, [11]
[Initial: 24Hours]
Auto:
Off:
Once:
Auto:
Off:
• Even if "Scroll" is set to "Off", you can scroll the display by
pressing D DISP for more than one second.
3
Select a PSM item.
4
Adjust the PSM item selected.
5
Repeat steps
other PSM items if necessary.
6
Finish the procedure.
OK
[Initial]; The built-in clock is automatically adjusted
using the clock time data in the RDS signal.
Cancels.
[Initial]; Scrolls the disc information once.
Repeats scrolling (5-second intervals in between).
Cancels.
Ex.: When you select "Dimmer"
3
4
and
to adjust the