POLTI VAPORELLA SUPER PRO Manual De Instrucciones página 23

• During use, keep the product in a horizontal position on stable
surfaces.
• To continue steam delivery, return the switch to its original
position.
• Iron only on supports that are heat resistant and which allow
the steam to permeate.
• When placing the iron on its stand, make sure that the surface
on which the stand is placed, is stable.
• If the iron rest mat needs to be replaced, only use original
spare parts.
• The iron must be used and rested on a stable surface.
• Do not place the hot appliance on heat-sensitive surfaces.
• If ironing whilst sitting down, take care to ensure that the jet of
steam is not angled towards your legs. Steam can scald.
• Before connecting the appliance to the current, ensure that
the continuous steam jet button is not pressed (if present).
• Never leave the iron unattended when it is plugged in.
• Always use the appliance with the safety cap supplied or an
original replacement part. Using non-original Polti safety caps
can lead to accidents.
• When accessing the pressurised boiler (removing the cap, fil-
ling up), ensure that the appliance has been switched off at
the power switch and disconnected from the mains for at
least two hour, allowing it to cool. There is a risk of accidents
while the boiler is a switched on/hot and pressurised.
• Do not connect the appliance with the safety cap removed.
Carefully tighten the safety cap before plugging in and tur-
ning on the appliance.
• Before turning on the appliance, check that there is nothing
blocking the mouth of the boiler (filler bottle, funnel, or other
objects), and that the safety cap is closed.
• Check that the safety cap is correctly tightened; if steam is
escaping from the cap, switch off the boiler, unplug the
power cable, wait for two hour for the appliance to cool, and
then unscrew. Check the condition of the safety cap and seal.
| | 2 2 2 2 | |