W-Dmx; W-Dmx Status - Cameo EVOS W7 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 81
001
Mode
87CH
(Scene x)
Operating mode Art-Net / sACN + DMX
!
Temperature of the LED unit
030°C
030°C
87CH
Mode: Art-Net
Mode:
(sACN)
Art-Net (sACN)+DMX
0
Universe:
Universe:
0.150
IP:
IP:
192.168.000.150
001
DMX Address:
Main Address:
Pixel Address:
!
Main Menu
Slave and Scene operating mode
Control
DMX
Temperature of the LED unit

W-DMX

Settings
Art-Net
030°C
sACN
Info
Art-Net+DMX
sACN+DMX
Mode
Service
Kling-Net+DMX
Slave
Quick-Light
Scenes
(Scene x)
Control
!
DMX
DMX
W-DMX
W-DMX
Art-Net
Art-Net
030°C
Note on the main display in operating modes with external control: As soon as the control signal is interrupted, the characters in the display
sACN
sACN
begin to flash. When there is a control signal again, the flashing stops.
Art-Net+DMX
Art-Net+DMX
87CH
Mode:
Art-Net (sACN)+DMX
Warning: If the warning symbol (triangle with exclamation mark) appears in the display, there is an error with one or more components of
sACN+DMX
sACN+DMX
the device. Which components are affected can be seen in the Info Menu under Error Info. If the error cannot be rectified by a restart or
0
Universe:
Kling-Net+DMX
Kling-Net+DMX
reset, please contact an authorised service centre.
Slave
Slave
0.150
IP:
Scenes
Scenes
001
Main Address:
W-DMX™
Pixel Address:
Control
!
To pair a W-DMX receiver with a W-DMX compatible transmitter, the Reset command must be executed in the receiver menu under Connect
DMX
DMX
(select and confirm Reset). The receiver is now in pairing standby and waiting for a pairing request from a transmitter. Start the pairing by
W-DMX
W-DMX
selecting Link in the menu of the transmitter and confirm; the pairing now takes place automatically. In the same way, several receivers
Art-Net
Art-Net
can be paired simultaneously or one after the other to a transmitter (e.g. for master/slave operation). A W-DMX connection is always
sACN
sACN
maintained until the connection is disconnected by means of the Reset command in the receiver or the Unlink command in the transmitter,
Art-Net+DMX
Art-Net+DMX
DMX
regardless of whether a device has been disconnected from the power supply in the meantime.
sACN+DMX
sACN+DMX
W-DMX
Kling-Net+DMX
Kling-Net+DMX
Art-Net
Slave
Slave
sACN
W-DMX™ STATUS
Scenes
Scenes
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Control
Slave
Scenes
DMX
W-DMX
W-DMX de-
Art-Net
activated
activated as
sACN
receiver, not
Art-Net+DMX
DMX
sACN+DMX
W-DMX
Kling-Net+DMX
Art-Net
Slave
sACN
Scenes
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
DMX
Slave
!
!

W-DMX status

030°C
87CH
Mode:
0
0
Universe:
192.168.000.150
IP:
001
001
Main Address:
001
Pixel Address:
!
!
Control
DMX
W-DMX status
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Slave
Scenes
Control
!
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
0
Kling-Net+DMX
Slave
192.168.000.150
Scenes
001
Control
001
!
DMX
W-DMX
Art-Net
Control
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
W-DMX
W-DMX
W-DMX
activated
activated as
Control
as receiver
receiver and
paired
and paired,
paired, no
transmitter
DMX signal
is switched
off or out of
range
Control
Mode
Slave
(Scene x)
030°C
Operating mode
Operating mode
Mode:
Art-Net (sACN)+DMX
Kling-Net+DMX
Universe
Main address
Main Address:
IP address
192.168.000.150
Main address
001
Pixel address
001
Warning
Control
Control
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Operating mode
Slave
Scenes
Control
Control
Warning
DMX
W-DMX
Art-Net
030°C
sACN
Art-Net+DMX
Mode:
Kling-Net+DMX
sACN+DMX
Main Address:
Kling-Net+DMX
Slave
Scenes
Control
Control
DMX
W-DMX
Art-Net
Control
sACN
Art-Net+DMX
DMX
sACN+DMX
W-DMX
Kling-Net+DMX
Art-Net
Slave
sACN
Scenes
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
W-DMX
W-DMX
activated
activated as
Control
as receiver
transmitter
and paired,
with G4s
DMX
DMX signal
standard,
W-DMX
available
DMX signal
Art-Net
available
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
Control
DMX
Operating mode Kling-Net + DMX
!
Temperature of the LED unit
030°C
Mode:
Kling-Net+DMX
0
001
Main Address:
!
!
Control
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
Control
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
001
Kling-Net+DMX
Slave
Scenes
Control
!
DMX
W-DMX
Art-Net
sACN
Art-Net+DMX
sACN+DMX
Kling-Net+DMX
Slave
Scenes
W-DMX activated
W-DMX
as transmitter
activated as
with G3 standard,
transmitter with
no DMX signal
G4s standard,
no DMX signal
W-DMX status
001
!
W-DMX activated
as transmitter with
G4s standard, no
DMX signal
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Clew7

Tabla de contenido