Programming - Vimar Eikon 20446.N Manual Del Instalador

• TIMED MANUAL.
Used to set manual operation for a set time . Press key F until the
required mode is displayed (symbols
"" "" set the time (max 99 hours), then press the OK key .
N.B. It is not possible to access the Timed Manual mode if the
appliance is already on Manual or in another timed status .
• AUTOMATIC.
Used to set operation according to the previously configured
automatic program .
Press key F until the required mode is displayed (temperature
histograms blinking); then press the OK key .
N.B. It is possible to force the temperature values temporarily with
the key "" "" (for example when the required value is higher or
lower than the predefined one); this forcing will not however, alter
the set program .
30 - ENGLISH

9. PROGRAMMING.

• SETTING THE TIME AND DAY.
blinking); using key
Used to set the current time and day .
- Press key P until the required mode is displayed (name of day
- Using key "" "" set the hour (hours blinking), then press
- Using key "" "" set the minutes (minutes blinking), then
blinking); using key "" "" set the day of the week, then
press the OK key .
the OK key .
press the OK key .