Installation
Instructions
REMOVING THE FREEZER DRAWER
(on some
models)
The freezer drawer
can be removed,
if needed,
to fit through tight areas.
Read these instructions completely
and carefully.
[] REMOVE THE BASKET
[]
Open the freezer
drawer
until
it stops.
[]
The freezer
basket
rests on a frame
inside
the freezer
drawer.
Lift the basket
up at
the back.
[]
Lift the front
up and lift the entire
basket
up and out of the drawer.
\
[] REMOVE THE DRAWER FRONT
FROM THE SLIDES
[]
Remove
the Phillips
head screw
on each
side of the railing.
(_
DO NOT remove
the hex head
screws
from
the rail assemblies.
DO NOT remove
hex head screws
DO NOT remove
hex head screws
[] REMOVE THE DRAWER FRONT
FROM THE SLIDES (cont.)
[]
Lift up on both
sides of the freezer
drawer
handle
to separate
the drawer
railings
from
the rail assemblies.
[]
Set the drawer
front
on a non-
scratching
surface.
[]
Push the rail assemblies
back into
locking
position.
Rail
Assembly
Drawer
Assembly
[]
REMOVE
THE LEVELING
LEGS
(if needed)
If, after
removing
the freezer
drawer
and
refrigerator
door, the refrigerator
will
still
not fit through
a doorway,
the leveling
leg
brackets
can be removed.
[]
Remove
the base grille
by grasping
it at
the bottom
and pulling
it straight
out.
[]
Remove
both
brackets
with
a 3/8" hex
head driver.
22