positioned in the casing and that each of the brushes exerts
a small amount of pressure on the collector.
Re-attach the covers N with the corresponding screws,
making sure that no wires get caught in the process.
It is advisable to leave the machine running for 15 minutes
once the brushes have been changed.
If the collector burns or juts out, it should be serviced by a
VIRUTEX service technician.
Always keep the lead and plug in good working condition.
12. NOISE LEVEL
The noise and vibration levels of this device have been
measured in accordance with European standard EN 60745-
2-17 and EN 60745-1 and serve as a basis for comparison
with other machines with similar applications.
The indicated vibration level has been determined for the
device's main applications and may be used as an initial value
for evaluating the risk presented by exposure to vibrations.
However, vibrations may reach levels that are quite different
from the declared value under other application conditions,
with other tools or with insufficient maintenance of the
electrical device or its accessories, reaching a much higher
value as a result of the work cycle or the manner in which
the electrical device is used.
Therefore, it is necessary to establish safety measures to
protect the user from the effects of vibrations, such as
maintaining both the device and its tools in perfect con-
dition and organising the duration of work cycles (such as
operating times when the machine is subjected to loads,
and operating times when working with no-load, in effect,
not in use, as reducing the latter may have a considerable
effect upon the overall exposure value).
13. WARRANTY
All of VIRUTEX portable electrical goods are guaranteed for
12 months from the date of supply, excluding any damage
which is a result of incorrect use or of natural wear and
tear on the machine.
All repairs should be carried out by the official VIRUTEX
technical assistance service.
14. RECYCLING ELECTRICAL EQUIPMENT
Never dispose of electrical equipment with domestic waste.
Recycle equipment, accessories and packaging in ways that
minimise any adverse effect on the environment. Comply
with the current regulations in your country.
Applicable in the European Union and in European countries
with selective waste collection systems:
If this symbol appears on the product or in the accompanying
information, at the end of the product's useful life it must
not be disposed of with other domestic waste.
In accordance with European Directive 2002/96/EC, users
may contact the establishment where they purchased the
product or the relevant local authority to find out where
and how they can take the product for environmentally
friendly and safe recycling.
VIRUTEX reserves the right to modify its products without
prior notice.
F R A N Ç A I S
FRAISEUSE À RAINURES RA17 VB
1. INSTRUCTIONS DE SÉCURITÉ POUR LE
MANIEMENT DE LA FRAISEUSE A RAINURES
Lire attentivement la BROCHURE
D'INSTRUCTIONS GÉNÉRALES DE SÉCURITÉ,
jointe à la documentation de la machine.
1. Avant de brancher la machine, s'assurer que la tension
d'alimentation correspond à celle indiquée sur la plaque
des caractéristiques.
2. Maintenir toujours les mains éloignées de la zone de
coupe, et prendre toujours la machine par les poignées.
3. Utiliser toujours des outils d'origine VIRUTEX. Ne jamais
utiliser d'outils défectueux ou en mauvais état.
4. Il est necessaire de travailler avec l'aspiration de poussière
pour éviter que la fraise se casse.
2. CARACTÉRISTIQUES TECHNIQUES
Puissance absorbée.............................................................630 W
Moteur............................................................................50/60 Hz
Révolutions......................................................28.000/min
Pince porte-fraise......................................................Ø: 6 mm
Poids machine.............................................................1,9 kg
Niveau de pression acoustique
continu équivalent pondéré A..........................................86 dBA
Niveau de puissance acoustique A.....................................97 dBA
Incertitude............................................................................K = 3 dbA
Porter une protection acoustique!
Valeurs totales des vibrations.................................a
Incertitude.......................................................................K: 1,5 m/s
3. ÉQUIPEMENT STANDARD
A l'intérieur de la mallette de transport, vous trouverez les
éléments suivants (Fig. 1):
1.- Fraiseuse à rainures RA17 VB avec fraise carbure aiguisée
aux deux pointes.
2.- Guidage 90°.
3.- Guidage droit.
4.- Équerre réversible.
5.- Jauge de profondeur.
6.- Clé o/c: 11 mm pour axe moteur.
-1
: <2,5 m/s
2
h
2
9