Operation; Before Initial Use; Energy Saving Tips - Dometic GROUP WAECO CoolMatic CS-MP2 Instrucciones De Montaje

_CS-ACT-MP2.book Seite 21 Freitag, 15. Oktober 2010 10:55 10
CoolMatic CS-MP2
➤ Have the cooler cable connected to the cable laid by the Mercedes Benz
garage from the fuse box behind the cover panel (fig. a, page 4).
➤ Push the drawer back in (fig. b, page 4).
➤ Screw the lock tight again and put the panel back on.
➤ Fasten the board again and put the mattress back on.
✓ Installation is complete.
7

Operation

Note
Empty the cool box and switch it off before tilting the cab.
7.1

Before initial use

Note
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons (see
"Cleaning and care" on page 22).
7.2

Energy saving tips

Allow hot food to cool down first before you place it into the device.
Do not open the cooler more often than necessary.
Do not leave the cooler open for longer than necessary.
Avoid unnecessarily low temperature settings.
Operation
21