Optional Accessories (Sold Separately) - Metabo HPT DH 36DPA Manual De Instrucciones

English

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (Rotation + Hammering)
○ Drill Bit (Taper shank) and taper shank adaptor
(1) Drill Bit (Taper Shank)
Taper mode Code No.
Morse taper
303617
(No. 1)
Morse taper
303618
(No. 2)
A-taper 303619
B-taper 303620
2. Knock-in anchor (Hammering only)
Anchor Setter (for anchor setting)
(SDS-plus shank)
<Outer wedge type with the female screw>
Anchor W 1/4"
size (6.3 mm)
Overall 10-1/4"
Length (260 mm) (260 mm)
Code No. 302976
<Inner wedge type with the headless screw>
Anchor W 1/4"
size (6.3 mm)
Overall 10-1/4"
Length (260 mm) (260 mm)
Code No. 302979
24
(2) Taper Shank Adaptor
(SDS-plus shank)
Cotter (Code No. 944477)
Applicable drill bit
7/16" (11 mm)
1/2" (12.3 mm)
Drill bit
1/2" (12.7 mm)
(Taper
9/16" (14.3 mm)
shank)
9/16" (14.5 mm)
11/16" (17.5 mm)
Drill bit
(Taper 7/8" (21.5 mm)
shank)
Taper shank adaptor
formed A-taper or B-taper
is provided as an optional
accessory, but drill bit for it
is not provided.
W 5/16" W 3/8"
(8 mm) (9.5 mm)
10-1/4" 6-1/4" 10-1/4"
(160 mm) (260 mm)
302975 303621 302974
W 5/16" W 3/8"
(8 mm) (9.5 mm)
10-1/4" 6-1/4" 10-1/4"
(160 mm) (260 mm)
302978 303622 302977
Anchor setting adaptor
(for manual hammer)
<Outer wedge type with
the female screw>
Anchor size Code No.
W1/4"
971794
(6.3 mm)
W5/16"
971795
(8 mm)
W3/8"
971796
(9.5 mm)
W1/2"
971797
(12.7 mm)
W5/8"
971798
(15.9 mm)
3. Large hole boring (Rotation + Hammering)
Guide Center pin
Plate
Core bit Shank
(SDS-plus shank)
Guide plate
Core bit
(outer Code No.
diameter)
1-1/4"
982686
(32 mm)
1-3/8"
982687
(35 mm)
1-1/2"
982688
(38 mm)
<Inner wedge type with
the headless screw>
Anchor size Code No.
W1/4"
971799
(6.3 mm)
W5/16"
971800
(8 mm)
W3/8"
971801
(9.5 mm)
W1/2"
971802
(12.7 mm)
W5/8"
971803
(15.9 mm)
Core Bit
Core bit
(outer Code No.
diameter)
1-3/4"
982689
(45 mm)
2"
982690
(50 mm)