Orbegozo DS 61190 IN Manual De Instrucciones página 14

DS 61190 IN
1. Before installation, turn the unit off and unplug it from the mains.
2. The cooker hood should be place at a distance of 65-75cm above the cooking surface for best effect.
3. After decide the cooker hood height, place the hook in the center and mark 3 holes. Drill 3 holes of
8mm.
4. Put the drywall anchors into the holes and fix the hook screwing the 3 screws.
5. Calculate the final height of the U-shaped section, drill 2 holes of 8mm of diameter, ensure that it is
placed in line with hook.
6. Place the drywall anchors into the holes and fix the U-shaped section screwing the 2 screws in the holes.
7. Fix the extensive pipe onto the vent, it will be necessary to place before the supplied reducer.
8. Raise the cooker hood into its mounting position. Align the rectangular opening on the back of the hood
with the wall-mounting bracket. Gently low the hood until it securely engages the bracket.
14