Manuales relacionados para TORTU TT101/45-S
Resumen de contenidos para TORTU TT101/45-S
- Página 1 INOX Deck-Mount Single-Lever Basin Mixer H 450 mm Installation Guide - Guida D’installazione - Guia de Instalacion - Guide D’installation TT101/45-S...
-
Página 2: Installation Requirements
Attention – Before Installation Inspect this product to ensure you have all parts as shown that are required for proper installation. The valve cartridge has been factory tested and adjusted – DO NOT TAKE THE CARTRIDGE APART. Taking the cartridge apart will void the warranty. Ensure that both hot and cold water feeds are properly connected to the marked lav connecting. - Página 3 EN - INSTALLATION GUIDE Unscrew the locking nut (1), remove the stainless steel washer (2) and the rubber seal (3). Make sure the washer including o-ring is on the mixer body (4). Position the mixer. Fit the rubber seal (3) and the stainless steel washer (2) on the threaded stem (5) then tighten everything with the lock nut (1).
- Página 4 EN - MAINTENANCE Unscrew the lever (1) and the grub screw (2) using the supplied allen wrench (3). Remove the handle (4). Unscrew the ring nut (5) using the supplied key (6). Extract the cartridge (7). To fit, proceed in reverse order, making sure the reference pins at the bottom of the cartridge (7) are correctly positioned in the corresponding seat inside the tap body (8) and the support surface is perfectly clean (fig.9).
- Página 5 EN - CLEANING/MAINTENANCE For correct cleaning of the tap, wash itonly with solvent-free products. DO NOT use detergents containing corrosive or acid substances (hydrochloric, acetic or phosphoric acid), abrasive sponges and metallic scouring pads. It is advisable to use specific products for stainless steel. Our products do not require any particular maintenance, apart from periodical cleaning of the aerator which, over time, collects debris and impurities present in the pipes, thereby causing a gradual reduction in flow.
- Página 6 TT101/45-S...