Manuales relacionados para TORTU TT902INC-S
Resumen de contenidos para TORTU TT902INC-S
- Página 1 INOX Wall-Mount Thermostatic Tub/Shower Valve Trim with Volume Control & Thermostatic Tub/Shower Rough-in Valve with Volume Control Installation Guide - Guida D’installazione - Guia de Instalacion - Guide D’installation TT902INC-S TT902-S...
-
Página 2: Installation Requirements
Attention – Before Installation Inspect this product to ensure you have all parts as shown that are required for proper installation. The valve cartridge has been factory tested and adjusted – DO NOT TAKE THE CARTRIDGE APART. Taking the cartridge apart will void the warranty. Ensure that both hot and cold water feeds are properly connected to the marked lav connecting. - Página 3 1¼" 1¾" 2" [32] [43] [51] 5½" [136.6] Ø1¾" [45] 1¼" [30] ¼" 1½" [35] 5½" [139] 1½" 4" [35] [104] 5½" 2" [136.6] [50] 1¼" [30] 2" [49] 3" [74] 2015-...
- Página 4 5½" [139] 1½" 4" [35] [104] 5½" 2" [136.6] [50] ATTENTION VERY IMPORTANT PLACE THE ROUGH-IN 1¼" [30] WITH THE MEASURES INDICATED 2" [49] 3" [74] EN - INSTALLATION GUIDE Place the rough In on the wall, respecting the measurement indicated previously. At the time of fixing, check that the rough-in part is perfectly level.
- Página 5 EN - INSTALLATION GUIDE Position the cover (1) on the wall. Screw the lever (2) on to the water opening/closing control ring (3). Insert the temperature control knob (4) so that the lock button is in the vertical position, fixing it with the special screw (5) supplied.
- Página 6 EN - MAINTENANCE Remove the grub screw (1) using the 1.5 mm wrench supplied. Remove the cap (2). Unscrew th escrew (3) with a 2.5 mm wrench. Remove the handle (4) and latch ring temperature (5) and the command handle for opening and closing the water (6). With a 36 mm wrench unscrew the locking ring (7).
- Página 7 TT902INC-S EXIT INLET 1/2" GAS 1/2" GAS INLET COLD 1/2" GAS 3" [74] 1½" [35] 5½" [139] 4" [104]...
- Página 8 TT902-S 2¼" [58] Ø2½" [65] 3½" 2¼" 2" ENCASING MINIMUM ENCASING...