Installation - SmartBidet SB-3000 Manual Del Usuario

Installation

6
ᆞThis product requires 120V usage.
ᆞPlease do not plug in the electrical cord prior to installation.
ᆞPlease consult with a licensed electrician if electrical work is needed. In case a grounded
outlet is not available, grounding should be done in order to prevent short circuits or
electric shock.
Shut water supply by turning
1
it to the right.
Connect the water supply hose to the
3
assembled T-valve.
※ Check for any water leaks.
CAUTION BEFORE INSTALLATION
STEPS
Water supply hose
Disconnect existing hose from water tank.
2
Connect the T-valve to the water tank.
Water Tank
Shut off Valve
4
Remove existing seat and lid.
• Release the bolts on both
sides of the existing toilet
seat to remove the seat
and lid.
• Store the removed seat,
nut and water hose in a
safe area in case you
move or it needs to be
reinstalled.
T-valve
(with packing)
Exisiting toilet
seat
Toilet
Nut
body
15