weasy SX24 Manual De Usuario página 6

III. Usage
Please wash parts that connected with stuff thorough at the first time using the
product.(reference "the chapter four maintain and safeguard).
Instruction of button ：（ This product with a protection switch, it will not work without the
cover ）
"ON" button: gently forward click this button, the products begin to work. If you need
to stop halfway, turn "REV" button.
"REV" button. When squeeze unsmoothly or block up, press reverse button back
gently and do not release. The screw begin to reverse, loosen button and it will stop
reverse. Press "ON" button and it will get right to work continuely again.
One Use product
Please follow the following step to install the
The demolition methods is the opposite
Confirm the Silica gel Plug good before
the container.If the Silica gel plug isn't plug
the juice will spilled which decrease the juice
1．Juicer container based to the three holes and put the container on the main engine.
2．Assemble the Filter screen support（The arrow mark on the filter assemble match to the triangle
mark on the container）
3．Insert the screw into the central of Filter screen support.
·If the screw can not be inserted correctly, the lid can not be closed.
4. The container lid lock symbol alignment juice cup triangle then clockwise
turn to tighten the locking symbols and juice cup at the triangle on the
positive, that the cover is fully tightened. Open the lid when the lid is
unlocked at the triangle symbol and the juice cup alignment to open.
Arrow is on the top of filter
assembly bracket. The
arrow is small, please look
carefully.
use product
sequence to Assembly.
assembling
good,
quantity.