Safety Instructions - VITO PRO-POWER SDS-MAX Manual De Instrucciones

EN

SAFETY InSTRUCTIOnS

When using power tools, always
observe the safety regulations
applicable in your country to
reduce the risk of fre, electric
shock, personal injury and
material damage. Read the
following safety instructions
before attempting to operate this
product. Keep these instructions
in a safe place!
1. Keep work area clean. Cluttered
areas and benches can cause
accidents.
2. Consider work area
environment. Do not expose
power tool to humidity. Keep work
area well lit (250 –'D0 300 lux).
Do not use power tools in the
presence of infammable liquids
or gases.
3. Keep children away. Do not let
children come into contact with
the tool or extension cord. Keep
all people away from the work
area.
4. Dress properly. Do not
wear loose clothing or jewelry.
They can be caught in moving
parts. Preferably wear Rubber
gloves and non-slip footwear
when working Outdoors. Wear
protective hair covering to keep
long hair out of the way. When
working outdoors, preferably
wear suitable gloves and non-slip
footwear.
5. Personal protection. Always
use safety glasses. Everyday
eyeglasses only have impact
resistant lenses, they are not
safety glasses. Use a face or dust
mask whenever the operations
may production dust or fying
particles. If these particles might
be considerably hot, also wear a
heat-resistant apron.
Wear ear protection whenever the
sound level seems uncomfortable,
i.e., if the sound pressure stated in
this manual exceeds 85 dB(A).
6. Guard against electric shock.
Prevent body contact with earthed
surfaces (e.g. pipes, radiators,
cookers and refrigerators). For
use under extreme conditions
(e.g. high humidity, when metal
swarf is being produced, etc).
Electric safety can be improved by
inserting an isolating transformer
or an earth leakage circuit-
breaker.
7. Do not overreach. Keep proper
footing and balance at all times.
8. Stay alert. Watch what you are
doing. Use common sense. Do
not operate the tool when you are
tired.
9. Secure work piece. Use clamps
or a vice to hold the work piece. It
is safer and it frees both hands to
operate the tool.
10. Connecting dust extraction
equipment. If devices are provided
for the connection of dust
extraction and collection ensure
these are connected and properly
used, especially in confned areas.
11. Remove adjusting keys and
wrenches. Always check that
adjusting keys and wrenches are
removed from the tool before
switching on.
12. Extension cords for outdoor
use. When the tool is used
outdoors, only use extension
cords intended for outdoor use
and marked accordingly. Before
use, inspect the extension cable
and replace if damaged.
13. Use appropriate tool. The
intended use is laid down in this
instruction manual. Do not force
small tools or attachments to do
the job of a heavyduty tool. The
tool will do the job better and
safer at the rate for which it was
intended. Do not force the tool.
WARMInG: The use of any
accessory or attachment or
performance of any operation
with this tool, other than those
recommended in this instruction
manual may present a risk of
personal injury.
14. Check for damaged parts.
Before using the tool, carefully
check it for damage to ensure
that it will operate properly and
perform its intended function.
Check for misalignment and
seizure of moving parts, breakage
of parts and any other conditions
that may afect is operation.
Have damaged guards or other
detective parts repaired or
replaced as instructed. Do not use
the tool if the switch is detective.
15. Disconnect tool. Switch of
and wait for the tool to come to a
complete standstill before leaving
it unattended. Unplug the tool
when not in use, before servicing
or changing accessories.
16. Avoid unintentional starting.
Do not carry the p Jugged-in tool
with a fnger on the switch. Be sure
that the switch is released when
plugging in.
17. Do not abuse cord. Never
carry the tool by its cord or yank
it to disconnect from the socket,
keep the cord away from heat, oil
and sharp edges.
18. Store idle tools. When not in
use, power tools must be stored
in a dry place and locked up
securely, out of reach of children.
19. Maintain tools with care.
Keep the tools in good condition
and clean for Petter and safer
performance. Follow the
instructions for maintenance and
changing accessories inspect the
13