Control Panel - Eco-De ECO-699 Manual De Instrucciones

NET WEIGHT
MEASUREMENTS

CONTROL PANEL

Remote control with the same functions
as the unit control panel.
1. ON/OFF: Press once to make the unit ready for working.
SPEED: Press this button to select the desired speed: LOW – MID – HIGH
2. WIND: press this button to select the desired wind mode:
NORMAL: it works according to the selected fan speed
NATURE: imitates the natural irregularity of the wind
SLEEP: alternates between different fan speed
3. SWING: to direct the wind.
4. COOL: starts the evaporating cooling function
5. HEAT: releases hot wind. The unit works automatically at 1000W. Press again to
change it to 2000W. Press again to cancel.
6. IONIZER: releases negative ions to improve the air quality.
7. TIMER: Can be set between 30 min and 9,5 hours.
OPERATION INSTRUCTIONS
a) Pull the unit out of the carton and place it on a solid hot-proof horizontal surface.
b) Check if all the accesories are inside.
c) Take out the casters and the caster wrench. The casters with skid are for the two front
holes and the casters without skid are for the two back holes at the bottom of the unit.
(Fig. 1)
d) Pull upwards the water tank and add water. (Fig. 2)
Note:
IMPORTADO POR ECOGEST TRADE S.L.
7,5 Kg
280 x 310 x 810mm
C.I.F.: B-97346225