Time Setting; Set Alarm - OK. OCR 510 DAB+ Manual Del Usuario

TIME SETTING

The time will be automatically set in DAB mode. If there is no DAB
signal reception, the time can be set manually. Please refer to chapter
GENERAL SETTINGS.

SET ALARM

Note:
• The Alarm can only be set when the radio is turned on.
• Make sure the clock shows the correct time.
1 Press ALARM button to choose following options:
• [Alarm 1 Setup]
• [Alarm 2 Setup]
2 Press SELECT to access the Alarm Wizard.
3 [On time] Set the hours and minutes with TUN/CH and confirm with
SELECT.
4 Set the alarm duration [Duration] with TUN/CH and confirm with
SELECT.
• [15] The alarm sounds for 15 minutes.
• [30] The alarm sounds for 30 minutes.
• [45] The alarm sounds for 45 minutes.
• [60] The alarm sounds for 60 minutes.
• [90] The alarm sounds for 90 minutes.
• [120] The alarm sounds for 120 minutes.
5 Select the alarm tone [Source] with TUN/CH and confirm SELECT.
• [Buzzer]: Make the buzzer your alarm tone.
• [DAB]: Make the most recent DAB +station played your alarm tone.
• [FM]: Make the most recent FM station played your alarm tone.
Note:
If [DAB] or [FM] is selected, [last listened] will be displayed. Press
SELECT to confirm.
IM_OCR510 DAB_170913_V04_HR.indb 21
21
EN
13/9/17 9:36 am