Vortice VORT-KRYO POLAR Manual De Instrucciones página 15

ENGLISH
Take care not to form kinks in the hose (fig.10) where hot
air could be trapped and then on escaping set off the
automatic thermal cut-out system.
10 10
N.B.
The length of the hose has been carefully calculated to
match the specifications of the appliance. You are
advised not to replace the hose or extension as this may
lead to a fault developing.
Fitting the active carbon filters
Remove the filter holder frame from the appliance (fig.11)
11 11
Remove the filter fastening device from the frame
(fig.12)
12 12
Remove the filter from its packaging (fig.13)
13 13
15