Preparation For Use - Akai AM-301W Manual De Instrucciones

Unpacking and set up
AKAI AM-301
x Carefully remove all the components from the carton and remove all packing materials from
the components. Make sure noting is accidentally discarded with the packing materials.
x Save the carton and the packing materials, if possible, in the unlikely event that the unit ever
needs to be returned for service. Using the original carton and packing material is the only
proper way to protect the unit from shipping damage.
x Unwind the AC power cord on the back of the main unit and extend it to its full length.
1. Check if the power voltage, as shown on the type plate located on the back of the set,
corresponds to your local AC power supply. If it does not, consult your dealer or service centre.
2. Connect the speakers to the unit
Connect the speaker cables to the front speaker
terminals. Connect the black end of each wire
to the marked-(minus) and the other end to the
terminals \ marked + (plus) terminals.
3. Connect the power cord to the wall outlet. The power supply is now connected and ready for use.
4. To switch off completely, turn off the main power on/off button and unplug the power cord from
the wall outlet.
x Unplug the power cord from the wall outlet to protect your set during heavy thunderstorms.
x If electric cable is damaged, it must be replaced by manufacturer, or by the qualification persons,
in order to avoid a danger.
x The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

PREPARATION FOR USE

RCA Audio cable
Remote Control
CONNECTIONS
Line in audio cable
21
User manual