Akai AM-301W Manual De Instrucciones página 29

CD / MP3 OPERATION
Select another track or file
Press or button on the remote control to select a particular track.
Listening to your tracks (files) repeatedly (On Remote Control Only)
1. Press REPEAT button repeatedly to activate the REPEAT function in following order:
REPEAT 1 - REPEAT ALBUM (*MP3 MODE ONLY)- REPEAT ALL- OFF -
Listening to your tracks (files) randomly (On Remote Control Only)
1. Press RANDOM button to play tracks in a random order.
A-B function (On Remote Control Only)
During CD/MP3 DISC playback, you can press A-B button on remote to start from the point A
(time point you pressed), and ended point B when you press A-B button again and music will play
repeatedly from A to B.
Intro function (On Remote Control Only)
This feature allows you to play the 10 first seconds of each track on the disk.
Load the disc and wait until the display shows the total playing time and number of tracks. Press
INTRO button on remote control to activate the function, press again to cancel the function.
PROGRAM
Creating your own playlist
You can play up to 20 tracks on a CD in order.
1. Insert a CD and wait for to be read
2. Press PROG button on the remote control in STOP status.
3. Press / on the unit or on the remote control to select the track you want to
program. Press PLAY button on remote or on front panel of the unit to confirm your selection.
4. Press on the unit or on the remote control to play the programmed music files.
About MP3
MP3 Disc compatibility with this unit is limited as follows:
Sampling Frequency: 32-48 (MP3)
Bit rate: 32-320kbps (MP3)
Do not use special letters such as / :*?< > etc
Even if the total number of files on the disc has more than 1000, it will only be shown up to 999.
27