Presentation; Operating Mode; Automatic Mode - DELTACALOR Dinamic 1.0 Instrucciones De Uso

Presentation

Boost 2 hours button
Status LED
Knob:
Start (2 bips) / Stop (1 bip)
Temperature regulator
Functions
• Start / Stop using the knob.
• Boost 2H using the button.
• Pilot wire with 6 conductors according to the GIFAM standard.
• 1 status LED to indicate operating mode.
• Permanent saving of the various operating modes (only Boost 2 hours is not saved).

Operating mode

Stop (knob on the left turned to
Comfort mode, without heating
Comfort mode without heating, with signal on the pilot
wire
Comfort mode, with heating
Boost 2 hours mode (button)

Automatic mode

If the equipment is connected to a feeder control unit or a timer via a pilot wire, it will work
automatically according to the programs specified.
NOTE - If there is no pilot wire, it will constantly work in comfort mode.
Comfort When permanently in comfort mode, the units maintains the temperature
set, for example 20 °C.
Eco The economy mode corresponds to the comfort temperature minus 3,5 °C,
in order to reduce energy consumption while maintaining the comfort level.
Anti-
The anti-freeze mode makes it possible to protect the plants in a building
freeze against freezing, maintaining a constant temperature of 7 °C.
OPERATION
Mode
)
[ 13 ]
Status LED
LED off
Green LED on
Green LED flashing
Red LED on
Red LED flashing
[ EN ]