Publicidad
Idiomas disponibles
Idiomas disponibles
CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is properly
installed. See BAG CHANGING
for instruc-
tions.
3, Check to see that the motor safety filter is
properly
installed. See MOTOR SAFETY
FIL-
TER CLEANING
for instructions.
HOOD AND COVER
It is normal for the canister hood and cover
to come off when opened further than need-
ed. Line up the hinge slots, insert them, and
close the hood and/or cover to replace it.
E
•
CAUTION
Never open canister hood with the
cover open. This will help to prevent
damage from occurring
to the
canister
hood andlor cover,
HOSE
1. Line up the
hose latch tab
and notch in can-
ister hood and
insert hose into
canister
until it
Latch
Tab
snaps in place.
To remove:
Lift
hose latch tab
upward and pull
up on hose.
Release
(Some
Models) _--_'1
Notch
2. Insert handle
into wand until
lock button
snaps in place_
Be sure hose
is not twisted.
To remove:
Press handle
quick release
button and pull
up on handle.
To store: Disconnect
hose from wands and
canister to prevent stress on hose during
storage.
Store hose in a loosely coiled
position so the hose covering is not stressed.
Hose
Latch Tab
Cover
Electronic
BaglHose
Check
Hood
Dust Bag
Publicidad
