Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO START
Personal
Injury and Product Damage
Hazard
• DO NOT plug in if switch is in ON
position.
Personal injury or
damage could result.
• The cord moves rapidly when
rewinding.
Keep children away
and provide a clear path when
rewinding
the cord to prevent
personal
injury°
,
DO NOT use outlets
above
counters.
Damage from cord to
items in surrounding
area
could occur.
J!J!ll
IIIII
I
i
iiiiiiiii1,,,,,11
Cord
Rewind
1. Pull cord out of
canister to desired
length, The cord
will not rewind until
the cord rewind
bar is pushed°
NOTE: To reduce the risk of electric shock,
this vacuum
cleaner has a polarized plug;
one blade is wider than the other. This plug
will fit in a polarized
outlet only one way. if
the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, con-
tact a qualified electrician
to install the prop-
er outlet. Do not change the plug in any
way.
2. Plug the polarized
power cord into a 120
Volt outlet located near the floor,
To rewind:
Unplug
the cleaner. Hold
the plug while
rewinding
to pre-
vent damage or
injury from the
moving cord° Push
cord rewind bar.
Pile Height
Indicator
Handle
Release
Pile Height Pedal
(Some Models)
3. Lower wand from upright position by
pressing on the handle release pedal,,
E
CAUTION ...............................
DO NOT leave the Power-Mate ®
running
in one spot in the upright
position
for any length
of time.
Damage to carpet may occur.
4. Select a pile height setting by pressing
the small pedal on the rear of the Power-
Mate®° The pile height setting shows on the
indicator. See SUGGESTED
PILE HEIGHT
SETTINGS_
Attention:
Refer to your carpet manufac-
turers cleaning
recommendations.
Some
more delicate carpets may require that they
be vacuumed
with the Power-Mate ® agitator
turned off, to prevent carpet damage.
=
--
=
=
--
=
L,
--
/d
\--._/]
_OFF
FLOOR
\ ._
5. Select a switch
position on the
handle°
OFF
FLOOR - turns on the canister motor only.
CARPET
- turns on both the canister
and
the Power-Mate ® motors_
NOTE - When this switch is in the FLOOR
position,
the headlight and dirt sensor
(some models) DO NOT function since no
electricity
flows to the Power-Mate ® .
Publicidad
