Noise Emission; Technical Data - Proficook PC-EWB 1079 Instrucciones De Servicio

Problem Possible
Cause
Although the There is air in
tank is full, no the pump line.
water is being
pumped to the
ice maker.
Action after a In this case,
power failure. unfinished ice
cubes may
remain on the
taps.

Noise Emission

The workplace-related emission value is less than
70 dB(A)

Technical Data

Model: ..............................................PC-EWB 1079
Voltage supply: ............................ 220-240 V, 50 Hz
Power input: ................................................... 150 W
Ice cube production: .................... 10-15 kg / 24 hrs.
Water tank volume: ......................approx. 1.7 Liters
Coolant: ...................................................R134a/85g
Protection class: ..................................................... I
Net weight: .....................................................9.8 kg
The right to make technical and design modifica-
tions in the course of continuous product develop-
ment remains reserved.
This device has been tested according to all
relevant current CE guidelines, such as electro-
magnetic compatibility and low voltage directives,
and has been constructed in accordance with the
latest safety regulations.
Solution
Lift the ice
maker slightly.
Pull the plug on
the bottom of
Meaning of the "Dustbin" Symbol
the water tank
Protect our environment: do not dispose of electri-
for a short time
cal equipment in the domestic waste.
and allow a few
Please return any electrical equipment that you will
drops to run
no longer use to the collection points provided for
out.
their disposal.
Switch off the
appliance and This helps avoid the potential effects of incorrect
remove the ice disposal on the environment and human health.
cubes by hand.
This will contribute to the recycling and other forms
of reutilization of electrical and electronic equip-
ment.
Information concerning where the equipment can
be disposed of can be obtained from your local
authority.
Disposal
39