Fuel Filter; Ordering Replacement Parts; Disposal And Recycling - EINHELL GH-PW 18 Manual De Instrucciones

Ocultar thumbs Ver también para GH-PW 18:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
7.2.4 Fuel fi lter
Remove the fuel line (Figure 14)
Unscrew the fuel filter from the tank (Figure
15)
Clean the fuel filter with compressed air. En-
sure that you do not damage the filter.
Assemble in reverse order.
7.3 Storage
Rinse the pump thoroughly with water before
lengthy periods of inactivity or winter storage.
Close the petrol cock and allow the engine to
run until it stops to empty the carburetor.
Fill the tank fully to prevent rust formation.
Remove the drain plug (Figure 1 / Item 6) and
fully drain the pump housing.
Store the machine in a dry place out of the
reach of children.

7.4 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
Anl_GH_PW_18_SPK9.indb 17
Anl_GH_PW_18_SPK9.indb 17
GB
- 17 -
30.01.2019 11:05:03
30.01.2019 11:05:03

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

41.713.90

Tabla de contenido