HumanTechnik PL-51 Instrucciones De Servicio página 9

Congratulations on purchasing your
telephone amplifier PL-51. We hope
it will give you many years of reassu-
ring operation. Please read through
these operating instructions carefully.
They tell you how to set up the
system correctly and explain all the
system's features to you.
Standard components
Please check if all following compo-
nents are included:
- Telephone amplifier PL-51
- Connection cord
- 2 x 1,5 V mignon batteries
- Operating Instructions
- Warranty card
If any parts are missing, please
immediately contact your dealer or
the manufacturer directly.
Setting up the system
Please follow these instructions befo-
re using the telephone amplifier:
1. Telephone receiver cord
Unplug the telephone cord from the
telephone connection socket.
Remove the receiver cord from the
cable guide on the underside of your
telephone by pushing the locking
clip towards the body of the plug and
pulling it out together with the cord.
This plug of the receiver cord (1) is
plugged into the socket on the small
side of the PL-51 . Make sure the plug
catches completely.
2. Connection cord
Plug one end of the supplied con-
nection cord (2) into the wide side of
the PL-51 and plug the other end into
the receiver socket on the underside
of the telephone. Position the cord in
the empty cable guide. Finally recon-
nect the telephone cord to the tele-
phone connection socket. Your tele-
phone is now ready to operate again.
Switch on
The hearing amplifier automatically
switches on when the receiver of the
telephone is picked up. The green
light on top of the unit lights up to indi-
cate that the amplifier is switched on.
2
1
English 9