To Set The Timer - Panasonic CS-C9KKV Instrucciones De Operación

8
TO ENJOY CLEAN AND FRESH AIR
PATROL
PATROL/
PATROL - To monitor air quality
• Detects air quality; e-ion operation
activates when air quality is at dirty
level.
• Regardless of air quality, to
maintain air freshness e-ion
activates automatically (PATROL
SENSOR indicator turns red) when:
- 2 minutes after the unit is on, or
- exceeds 4 hours at clean level.
• Can be activated even when the unit is turned off.
• Patrol starts automatically with the unit switched on with
OFF/ON
.
- To freshen and purify the air
• Generates negative ions to produce fresh air effect and
attract dust which will then be captured at the positively
charged e-ion fi lters.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing can not be adjusted.
9
TO ENJOY QUIET OPERATION
• This operation reduces airfl ow noise.
TO REACH TEMPERATURE
10
QUICKLY
• This operation will stop automatically after 15 minutes.
11
TO SWITCH BETWEEN QUIET & POWERFUL
QUIET POWERFUL
QUIET/
POWERFUL
• QUIET & POWERFUL operations function similarly as
described for 9 and 10 respectively.
6
9
C18KKV, C18KKV-6, C24KKV, C24KKV-6, C18KKV, C18KKV-6, C24KKV, C24KKV-6,
C28KKV, C28KKV-6 C28KKV, C28KKV-6
12
NORMAL
13
14
Indicator Air Quality
Blue Clean
15
Orange Moderate
Red Dirty
NORMAL
10
Press and hold for 5 seconds to dim or restore the
unit's indicator brightness.
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
Press to restore the remote control's default setting.
Not used in normal operations.
NOTES NOTES
PATROL/
QUIET POWERFUL
, ,
• Can be activated in all modes and can be cancelled
by pressing the respective button again.
QUIET/
QUIET POWERFUL
POWERFUL
, ,
• Cannot be selected at the same time.

TO SET THE TIMER

TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
1
OFF
Select ON or
Set the time
OFF timer
• To cancel ON or OFF timer, press
press .
CANCEL
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
SET
resumed) by pressing
ECO
QUIET/
PATROL
POWERFUL
, ,
ECO
PATROL
,
2
SET
Confi rm
ON
or then
OFF
.
5