Impecca RA-2138 Manual De Usuario página 7

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Attach the left upper door self-locking block and the left door-
open stopper to the left side of the freezer door.
Upper door
self-locking block
Le door-open
stopper
Remove the right upper door self-locking block and the right
door-open stopper. Store in a safe place in case you need to
reverse the door position again.
Remove the two hole caps from the left side, where the center
hinge will go, and insert them into the right side.
Attach the refrigerator door on the bottom hinge and then
attach the left center hinge to the left side of the refrigerator.
Attach the le center hinge
STEP 6 REINSTALLING THE FREEZER DOOR
Put the freezer door onto the left center hinge and then attach
the top left hinge to the top of the refrigerator. Cover the hinge
with the top left hinge cover and cover the screw holes on the
right side of the top with the cover plate (removed in a previ-
ous step).
Attach the top le hinge
STEP 7 REMOVING DOOR HANDLES
Remove the screw caps on the door handles. Use an Allen
wrench to remove the four Allen-screws securing the handles
to the left side of the freezer and refrigerator doors. Remove
the handles.
STEP 8 REINSTALLING THE DOOR HANDLES
Remove the four Phillips-head screws from the left side of the
freezer and refrigerator doors. Screw the four Phillips-head
screws into the holes on the right side of the freezer and refrig-
erator doors.
Attach the handles to the right side of the freezer and refriger-
ator doors with the Allen-head screws removed in a previous
step. Tighten with the Allen wrench and replace the screw
caps.
STEP 9 REFITTING HOLE PLUGS AND HANDLE CAPS
Replace all handle hole plugs into the remaining holes on the
left side. Refit the handle caps onto the ends of handles to
cover screw holes.
–7–

Publicidad

Tabla de contenido
loading

Tabla de contenido