O
PERATION
4. O
PERATION
Control Panel Operation
To access the control panel functions, use the four buttons located underneath the display. Please refer to
the
Product Overview
to see the button locations on the control panel.
B
UTTON
<MENU>
<UP>
<DOWN>
<ENTER>
Menu Map
M
M
L
ODE
AIN
3-CH
DMX Mode
16CH
Static Colors
C--
Rotation
Moto
Mode
Automatic
P--
Programs
Auto Speed
S--
Sound-Active
Snd
Mode
Infrared
SEt
Mode
Configuration (DMX)
The Helicopter Q6 works with a DMX controller. Information about DMX is in the CHAUVET DMX Primer,
which is available from the Chauvet website
DMX_Primer_rev05_WO.pdf.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels the selected DMX
mode uses. If you choose a starting address that is too high, you could restrict the access to some of the
product's channels.
The Helicopter Q6 uses up to 16 DMX channels, which defines the highest configurable address as 497.
If you are not familiar with the DMX protocol, download the DMX Primer from www.chauvetdj.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until 3-CH or 16CH shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to select the starting address, from d 1–510.
4.
Press <ENTER>.
Helicopter Q6 User Manual Rev. 1
F
UNCTION
Press to find an operation mode or to back out of the current menu option
Press to scroll up the list of options or to find a higher value
Press to scroll down the list of options or to find a lower value
Press to activate a menu option or a selected value
P
EVEL
ROGRAMMING
d001–510
d001–497
C 1
C 2
C 3
C 4
di-L
di-r
P 1–10
S 01–99
Sn 1–10
on
oFF
http://www.chauvetlighting.com/downloads/
L
D
EVELS
ESCRIPTION
3-channel DMX mode
16-channel DMX mode
Static red
Static green
Static blue
Static white
Sets left rotation and speed
S 0–99
Sets right rotation and speed
Automatic programs
Program speed for P1–10
Sound-active programs
Turns infrared on or off
Page 9 of 98